Related Resources • Linux Newbie Administrator Guide • 0. Linux Benefit • 1. Before Installation • 2. Linux Resources/Help • 3. Basic Operations FAQ • 4. Newbie Admin FAQ • ~ 4.1 Lilo • ~ 4.2 Drives • ~ 4.3 X-Windows • ~ 4.4 Configurations • ~ 4.5 Networking • 5. Shortcuts / Commands • 6. Linux Applications • 7. Learn Linux Commands • A. How to Upgrade Kernel?

4.1.1 Linux cannot detect all my memory

If you have more than 64 megabytes of physical memory, Linux kernel ver. 2.0.36 or lower will use, by default, only the first 64 MB. To see how much memory Linux uses on your system, type:
cat /proc/meminfo
or
free

You can check your version of Linux kernel with:
uname -a

The last popular kernel with the "memory problem", 2.0.36, comes with RedHat 5.2.  My RedHat 6.0 came with kernel 2.2.5-15 so it does not have the "memory problem" any more.

To get more than 64 MB memory recognized on RH5.2, you have to edit (as root) the file /etc/lilo.conf, and add a line like this just before your first "image=" statement:
append="mem=80M"

If you have an amount of memory different than 80 MB, adjust the above line. For any changes in /etc/lilo.conf to take effect, you *must* re-run the program
lilo

(watch if it runs without errors) and reboot. After the reboot, you can check if your adjustment worked using either of these two commands:
cat /proc/meminfo
free

For testing purposes, or if you are having problems, the option of specifying the amount of memory at the LILO prompt is useful:

[type at LILO prompt during bootup] linux "mem=16M"

Occasionally, I hear the advice to skip the upper few megabytes if you have problems enabling all your memory, or the machine locks up. E.g., enable only 78 out of your 80 MB. This is apparently the case for some SCSI controllers that use the very upper chunk of the main memory. Take it for what it's worth.

Occasionally on some systems, Linux recognizes only 16 MB of memory. This is usually linked to the setting "memory hole at 15-16 MB" enabled in the BIOS setup (the solution is to disable this BIOS setting). It is probably a good idea to disable all "advanced" features in your BIOS setup anyway (for example, the BIOS virus detection seems to be a common source of problems ).

Mixture of memory chips with different timings can also lead to memory recognition problems or to system crashes (the solution is to replace the memory chips so that the timing of all memory chips is the same)

Next > 4.1.2 LILO displays only LI (or LIL) and hangs