Linux / Unix Command: pnmtopalm

Command Library

NAME

pnmtopalm - convert a portable anymap into a Palm pixmap

 

SYNOPSIS

pnmtopalm [-verbose] [-depth N] [-maxdepth N] [-colormap] [-transparent color] [-offset]
[-rle-compression|-scanline-compression] [pnmfile]

 

DESCRIPTION

Reads a PNM image as input, from stdin or pnmfile. Produces a Palm pixmap as output.

Palm pixmap files are either greyscale files 1, 2, or 4 bits wide, or color files 8 bits wide, so pnmtopalm automatically scales colors to have an appropriate maxval, unless you specify a depth or max depth. Input files must have an appropriate number and set of colors for the selected output constraints. This often means that you should run the PNM image through ppmquant before you pass it to pnmtopalm. Netpbm comes with several colormap files you can use with ppmquant for this purpose. They are palmgray2.map (4 shades of gray for a depth of 2), palmgray4.map (16 shades of gray for a depth of 4), and palmcolor8.map (232 colors in default Palm colormap).

 

OPTIONS

-verbose

Display the format of the output file.

-depth N

Produce a file of depth N, where N must be either 1, 2, 4, 8, or 16. Any depth greater than 1 will produce a version 1 or 2 bitmap. Because the default Palm 8-bit colormap is not grayscale, if the input is a grayscale or monochrome pixmap, the output will never be more than 4 bits deep, regardless of the specified depth. Note that 8-bit color works only in PalmOS 3.5 (and higher), and 16-bit direct color works only in PalmOS 4.0 (and higher). However, the 16-bit direct color format is also compatible with the various PalmOS 3.x versions used in the Handspring Visor, so these images may also work in that device.

-maxdepth N

Produce a file of minimal depth, but in any case less than N bits wide. If you specify 16-bit, the output will always be 16-bit direct color.

-offset

Fill in the nextDepthOffset field in the file header, to provide for multiple renditions of the pixmap in the same file.

-colormap

Build a custom colormap and include it in the output file. This is not recommended by Palm, for efficiency reasons. Otherwise, pnmtopalm uses the default Palm colormap for color output.

-transparent color

Marks one particular color as fully transparent. The format to specify the color is either (when for example orange) "1.0,0.5,0.0", where the values are floats between zero and one, or with the syntax "#RGB", "#RRGGBB" or "#RRRRGGGGBBBB" where R, G and B are hexadecimal numbers. This also makes the output bitmap a version 2 bitmap. Transparency works only on Palm OS 3.5 and higher.

-rle-compression

Specifies that the output Palm bitmap will use the Palm RLE compression scheme, and will be a version 2 bitmap. RLE compression works only with Palm OS 3.5 and higher.

-scanline-compression

Specifies that the output Palm bitmap will use the Palm scanline compression scheme, and will be a version 2 bitmap. Scanline compression works only in Palm OS 2.0 and higher.

 

SEE ALSO

palmtopnm(1), ppmquant(1), pnm(5)

 

---

Important: Use the man command (% man) to see how a command is used on your particular computer.

>> Linux/Unix Command Library

>> Shell Command Library