1. Technology
Linux / Unix Command: wtmp
Command Library

NAME

utmp, wtmp - login records  

SYNOPSIS

#include <utmp.h>  

DESCRIPTION

The utmp file allows one to discover information about who is currently using the system. There may be more users currently using the system, because not all programs use utmp logging.

Warning: utmp must not be writable, because many system programs (foolishly) depend on its integrity. You risk faked system logfiles and modifications of system files if you leave utmp writable to any user.

The file is a sequence of entries with the following structure declared in the include file (note that this is only one of several definitions around; details depend on the version of libc):



#define UT_UNKNOWN            0
#define RUN_LVL               1
#define BOOT_TIME             2
#define NEW_TIME              3
#define OLD_TIME              4
#define INIT_PROCESS          5
#define LOGIN_PROCESS         6
#define USER_PROCESS          7
#define DEAD_PROCESS          8
#define ACCOUNTING            9

#define UT_LINESIZE           12
#define UT_NAMESIZE           32
#define UT_HOSTSIZE           256

struct exit_status {
  short int e_termination;    /* process termination status.  */
  short int e_exit;           /* process exit status.  */
};

struct utmp {
  short ut_type;              /* type of login */
  pid_t ut_pid;               /* pid of login process */
  char ut_line[UT_LINESIZE];  /* device name of tty - "/dev/" */
  char ut_id[4];              /* init id or abbrev. ttyname */
  char ut_user[UT_NAMESIZE];  /* user name */
  char ut_host[UT_HOSTSIZE];  /* hostname for remote login */
  struct exit_status ut_exit; /* The exit status of a process
                                 marked as DEAD_PROCESS. */
  long ut_session;            /* session ID, used for windowing*/
  struct timeval ut_tv;       /* time entry was made.  */
  int32_t ut_addr_v6[4];      /* IP address of remote host.  */
  char pad[20];               /* Reserved for future use.  */
};

/* Backwards compatibility hacks.  */
#define ut_name ut_user
#ifndef _NO_UT_TIME
#define ut_time ut_tv.tv_sec
#endif
#define ut_xtime ut_tv.tv_sec
#define ut_addr ut_addr_v6[0]

This structure gives the name of the special file associated with the user's terminal, the user's login name, and the time of login in the form of time(2). String fields are terminated by '\0' if they are shorter than the size of the field.

The first entries ever created result from init(8) processing inittab(5). Before an entry is processed, though, init(8) cleans up utmp by setting ut_type to DEAD_PROCESS, clearing ut_user, ut_host, and ut_time with null bytes for each record which ut_type is not DEAD_PROCESS or RUN_LVL and where no process with PID ut_pid exists. If no empty record with the needed ut_id can be found, init creates a new one. It sets ut_id from the inittab, ut_pid and ut_time to the current values, and ut_type to INIT_PROCESS.

getty(8) locates the entry by the pid, changes ut_type to LOGIN_PROCESS, changes ut_time, sets ut_line, and waits for connection to be established. login(8), after a user has been authenticated, changes ut_type to USER_PROCESS, changes ut_time, and sets ut_host and ut_addr. Depending on getty(8) and login(8), records may be located by ut_line instead of the preferable ut_pid.

When init(8) finds that a process has exited, it locates its utmp entry by ut_pid, sets ut_type to DEAD_PROCESS, and clears ut_user, ut_host and ut_time with null bytes.

xterm(1) and other terminal emulators directly create a USER_PROCESS record and generate the ut_id by using the last two letters of /dev/ttyp%c or by using p%d for /dev/pts/%d. If they find a DEAD_PROCESS for this id, they recycle it, otherwise they create a new entry. If they can, they will mark it as DEAD_PROCESS on exiting and it is advised that they null ut_line, ut_time, ut_user, and ut_host as well.

xdm(8) should not create a utmp record, because there is no assigned terminal. Letting it create one will result in errors, such as 'finger: cannot stat /dev/machine.dom'. It should create wtmp entries, though, just like ftpd(8) does.

telnetd(8) sets up a LOGIN_PROCESS entry and leaves the rest to login(8) as usual. After the telnet session ends, telnetd(8) cleans up utmp in the described way.

The wtmp file records all logins and logouts. Its format is exactly like utmp except that a null user name indicates a logout on the associated terminal. Furthermore, the terminal name "~" with user name "shutdown" or "reboot" indicates a system shutdown or reboot and the pair of terminal names "|"/"}" logs the old/new system time when date(1) changes it. wtmp is maintained by login(1), init(1), and some versions of getty(1). Neither of these programs creates the file, so if it is removed, record-keeping is turned off.  

SEE ALSO

ac(1), date(1), getutent(3), init(8), last(1), login(1), updwtmp(3), who(1)


Important: Use the man command (% man) to see how a command is used on your particular computer.

>> Linux/Unix Command Library

>> Shell Command Library

You can opt-out at any time. Please refer to our privacy policy for contact information.

Discuss in my forum

©2014 About.com. All rights reserved.