Linux IP Masquerade HOWTO
Prev
Chapter 5. Testing IP Masquerade
Next
5.4. Testing internal MASQ server connectivity
Step Four: Testing internal MASQ server connectivity
On the MASQ server, ping the internal IP address of the MASQ server's network interface card (i.e. ping 192.168.0.1 ). If this ping doesn't work, make sure that TCP/IP is correctly configured on the MASQed Server as described by the various Network HOWTOs (URLs can be found in the requirements section for your 2.4.x kernel in Section 2.6 , 2.2.x kernel in Section 2.7 , or 2.0.x kernel in Section 2.8 ). The output should look something like the following (hit Control-C to abort the ping):
--------------------------------------
masq-server# ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1): 56 data bytes
64 bytes from 192.168.0.1: icmp_seq=0 ttl=255 time=0.8 ms
64 bytes from 192.168.0.1: icmp_seq=1 ttl=255 time=0.4 ms
64 bytes from 192.168.0.1: icmp_seq=2 ttl=255 time=0.4 ms
64 bytes from 192.168.0.1: icmp_seq=3 ttl=255 time=0.5 ms
^C
--- 192.168.0.1 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.4/0.5/0.8 ms
---------------------------------------
Prev
Home
Next
Testing internal MASQ client to MASQ server connectivity
Up
Testing internal MASQ server to MASQ client connectivity
* License
