2.13 Starting Up the PC
When the PC is first turned on the BIOS chip runs its program to get the computer started (the first step is to check out the motherboard hardware). If the operating system is stored on the hard-drive (as it normally is) then the BIOS must know about the hard-drive. If the hard-drive is PnP then the BIOS may use PnP methods to find it. Also, in order to permit the user to manually configure the BIOS's CMOS and respond to error messages when the computer starts up, a screen (video card) and keyboard are also required. Thus the BIOS must always PnP-configure devices needed to load the operating system from the hard-drive.
Once the BIOS has identified the hard-drive, the video card, and the keyboard it is ready to start booting (loading the operating system into memory from the hard-disk). If you've told the BIOS that you have a PnP operating system (PnP OS), it should start booting the PC as above and let the operating system finish the PnP configuring. Otherwise, a PnP-BIOS will (prior to booting) likely try to do the rest of the PnP configuring of devices (but not inform the device drivers of what it did). But the drivers can still find out this by utilizing functions available in the Linux kernel.
* License
